We are an established precision HDD component manufacturing company located in Masjid Tanah, Melaka. In line with our expansion, we are looking for the new talents, passion, drive and resourceful candidates to face the challenges ahead. Therefore, you are invited to join us for the following positions:
Home > Join Us > Vacancy




>>>  Vacancy
1. NPI Engineers / Assistant Engineers     

Minimum Requirement:
  a) Education
  • Diploma / Degree in Engineering, Mechanical, Engineering (E&E) or equivalent

  b) Languages
  • Bahasa Malaysia, English, Chinese

  c) Knowledge / skill
  • Technically competent and knowledgeable on ISO 9001, GR&R , SPC, QC 7 tools, geometry, product process and clean room knowledge
  • Good Analytical skill
  • Good leadership and communication

  d) Working experience
  • Minimum 1 year(s) of working experience in the related field is required for this position.Fresh graduates are encourage to apply

Brief Job Description:
  • Product drawing review and provide DFM input
  • Define production process flow and tooling list
  • Engineering evaluation (Customer & Internal)
  • Lead and publish process FMEA
  • Perform Failure Analysis and provide corrective action
  • Process / Yield monitoring and Improvement
  • Lead the FA audit / new program process audit to meet customer requirement
  • Liaise with group of companies and customer about new program transfer

2. FA Measurement  Engineers / Assistant Engineers     

Minimum Requirement:
  a) Education
  • Diploma / Degree in Engineering, Mechanical, Engineering (E&E) or equivalent

  b) Languages
  • Bahasa Malaysia, English, Chinese

  c) Knowledge / skill
  • Knowledge and experience in handling machine such as CMM, Instrumentation and VMM is a must
  • Good Analytical skill
  • Good leadership and communication

  d) Working experience
  • Minimum 1 year(s) of working experience in the related field is required for this position.Fresh graduates are encourage to apply

Brief Job Description:
  • To perform measuring for product in various dimensions
  • Gathering and analysing measurement data from devices for use in quality control
  • Installing, maintaining and repairing measuring instruments and manual
  • Provides recommendations for new practices, new technology and new procedures that improve measurement
  • Monitor company measurement trans and provides analysis and recommendations for improvement

3. Engineers / Assistant Engineers  (SQE / CQE)     

Minimum Requirement:
  a) Education
  • Min Diploma holder with working experience either in QC / SQE / CQE

  b) Languages
  • Bahasa Malaysia, English, Chinese

  c) Knowledge / skill
  • Technically competent and knowledgeable on ISO 9001, correlation, gage repeatability & reproducibility, SPC, QC 7 tools, quality plan, product process and clean room knowledge

  d) Working experience
  • Minimum 1 year(s) of relevant working experience in manufacturing environment

Brief Job Description:
  • Ensure quality of product meet customer specification and fitness for use
  • Prepare relevant quality report for management review
  • Promote quality awareness among MA group
  • Assist in process / contamination continual improvement to meet customer satisfaction
  • Assist in new program development stage and phase in successfully
  • Responsible for customer''s quality feedback or new/revised requirement
  • Accomplish customer weekly report and quarter business rating report
  • Monthly process control plan audit to confirm the manufacturing readiness
  • Lead the customer regular visit / audit preparation

4. Lab Engineers / Assistant Engineers     

Minimum Requirement:
  a) Education
  • Diploma / Bachelor Degree in Biology, Chemistry, Engineering (Chemical), Science or equivalent

  b) Languages
  • Bahasa Malaysia, English, Chinese

  c) Knowledge / skill
  • Experience in LAB, technically competent in contamination control, cleanliness analysis in LPC, MESA, out gassing
  • Experience in HDD industry

  d) Working experience
  • Minimum 2 years of relevant working experience in the related field is required for this position

Brief Job Description:
  • To meet customer cleanliness specification
  • Ensure the correlation with customer is successfully carried out
  • Contamination continual improvement to meet customer needs and satisfaction
  • To perform Lab test operation and prepare Lab test analysis
  • To accomplish the customer weekly reports and up keep the cleanliness testing reports
  • To perform daily Lab equipments checking and control
  • To liaise with internal and external parties about the product cleanliness matters
  • To assist in problem solving of cleanliness matters and participate in new product development stage
  • Ensure the in-house testing method is meeting customer requirement

5. Senior Chemists     

Minimum Requirement:
  a) Education
  • Diploma / Bachelor Degree in Biology, Chemistry, Engineering (Chemical), Science & Technology or equivalent

  b) Languages
  • Bahasa Malaysia, English, Chinese

  c) Knowledge / skill
  • Competent in handling machine such as Ion Chromatography, out gassing, SEM, FTIR, DHS

  d) Working experience
  • Minimum 5 years relevant working experience in LAB, technically competent in contamination control, cleanliness analysis in LPC, MESA, out gassing

Brief Job Description:
  • To lead and oversee Group Laboratory operation & effectiveness
  • In charge of Group''s product cleanliness management including contamination control and continual improvement
  • To analyse, interpretation of result and reporting
  • To establish the root cause of product non-conformance and follow up with the preventive and corrective action
  • Liaise with customer, internal and external parties in any cleanliness related matters e.g. new requirement in order the specification of product meet customers specification and fitness for use
  • To provide consultancy and train the contamination team on HDD cleanliness know

6. Contamination Control Engineers     

Minimum Requirement:
  a) Education
  • Diploma / Bachelor Degree in Biology, Chemistry, Engineering (Chemical), Science & Technology or equivalent

  b) Languages
  • Bahasa Malaysia, English, Chinese

  c) Knowledge / skill
  • Knowledge & skills in problem solving, 8D corrective action, statistical analysis tool (Minitab)
  • Experience in clean room control environment
  • Technically competent and knowledgeable on ISO 9001
  • Computer literate (MS excel & Power Point)

  d) Working experience
  • Minimum 2 years of working experience in quality / chemical field in electronic / semiconductor industry

Brief Job Description:
  • Responsible on product cleanliness performance
  • Responsible for customer feedback / request to product cleanliness matter
  • Perform failure analysis on product that does not meet cleanliness specification
  • Drive internal improvement plans to promote product cleanliness performance
  • Perform internal audit & external supplier audit to ensure process compliance to cleanliness performance
  • Compile weekly report for internal & customer

7. Automation Design Engineers     

Minimum Requirement:
  a) Education
  • At least a Diploma, Advanced / Higher / Graduate Diploma, Engineering (Mechanical) or equivalent

  b) Languages
  • Bahasa Malaysia, English, Chinese

  c) Knowledge / skill
  • Technically competent and knowledgeable in design, expert in auto cad, solid work

  d) Working experience
  • Minimum 3~5 years of working experience in EMS (electronic manufacturing services) industry as Programmer / Automation Designer

Brief Job Description:
  • To design and build of automation assembly new machine / new equipment (3D & 2D)
  • To debug, validate and start-up of assembly machine / equipment with support directly on production floor
  • Provide documentation and support to equipment to meet design requirement allowing transferring to manufacturing
  • Continuous improvement of existing assembly machines, identifying areas to streamline or improve processes, productivity and reliability
  • Generate all required paperwork for fabrication and support of machinery, fabrication, assembly and maintenance drawings
  • Prepare proposal for customer and presentation
  • Develop and manage accurate project schedules and budgets
  • Key member in process improvement

8. Automation PLC Engineers     

Minimum Requirement:
  a) Education
  • Diploma / Degree in Engineering, Mechanical, Engineering (E&E) or equivalent

  b) Languages
  • Bahasa Malaysia, English, Chinese

  c) Knowledge / skill
  • Knowledge in circuit, theory & design
  • Experience in PLC programming (Min 1 year)
  • Skills in machine debug and troubleshooting, sensor, application for cylinder, AC & DC motor, servo motor, sensor & all Pneumatic components

  d) Working experience
  • Minimum 2 years of working experience in EMS (electronic manufacturing services) industry as Programmer / Automation Designer

Brief Job Description:
  • Get to know the requirements (product, process etc)
  • Prepare machine flow chart and all related documents
  • Prepare programming for HMI & PLC
  • Trial run and debug
  • Continuous improvement and program modification

9. Metrology Engineers     

Minimum Requirement:
  a) Education
  • Diploma / Degree in Engineering, Mechanical, Engineering (E&E) or equivalent

  b) Languages
  • Bahasa Malaysia, English, Chinese

  c) Knowledge / skill
  • Knowledge in Measurement System Analysis (MSA)
  • Knowledge in Geometrical Dimensioning & Tolerancing (GDT)
  • Able to operate CMM and write CMM program
  • Good leadership and communication

  d) Working experience
  • Minimum 4 years of working experience in the related field is required for this position

Brief Job Description:
  • Interpret customer drawing and plan for measurement inspection method
  • Discuss with Engineering to design measurement fixture
  • Coordinate and guide QC inspectors on handling measurement equipment
  • Liaise with customer on MSA related matter
  • Maintenance of measurement equipment and software master file

10. Tooling Engineers / Assistant Engineers (Plastic Injection)     

Minimum Requirement:
  a) Education
  • Minimum SPM / Certificate in Plastic Mold or equivalent

  b) Languages
  • Bahasa Malaysia, English, Chinese

  c) Knowledge / skill
  • Competent in plastic mold knowledge
  • Able to work under pressure with tight schedule
  • Able to work independently without supervision
  • Willing to work shift

  d) Working experience
  • Minimum ten (10) years of relevant working experience in plastic injection molding in hard disk drive plastic components industry

Brief Job Description:
  • Responsible for mold design, fabrication and modification
  • To trouble shoot and continual improvement on mold & product quality
  • To advice and recommend on technical know-how on tooling (plastic injection components) to improve mold / tooling performance quality
  • To ensure the quality of the mold always in the good condition to minimum the interruption to the production
  • Perform Mold set up activities & improve quality of machine

11. Production Engineers / Assistant Engineers / Supervisors     

Minimum Requirement:
  a) Education
  • Minimum SPM requirement/ certificate in Engineering discipline

  b) Languages
  • Bahasa Malaysia, English, Chinese

  c) Knowledge / skill
  • Relevant experience in manufacturing line

  d) Working experience
  • Minimum 5 years of working experience in supervisory, production line arrangement

Brief Job Description:
  • Manpower / line arrangement for daily prod confirmation
  • Ensure output / in stock follow the MPS
  • Productivity and scrap rate planning & monitoring
  • Leave arrangement for AE / Leader / FSO

12. MIS Computer Programmer     

Minimum Requirement:
  a) Education
  • Diploma/Degree in Computer Science or equivalent

  b) Languages
  • Bahasa Malaysia, English, Chinese

  c) Knowledge / skill
  • Working knowledge on ASP.Net ,C#, Visual Studio.net ,PHP, VB Script and MS SQL Server
  • Well versed in relation database design and implementation
  • Proficiency in XML, Crystal Report would be an advantage
  • Self-starter with analytical mind and able to work with minimum supervision
  • Ability to work under pressure and meet deadlines
  • Process good attitude and willing to learn
  • Excellent problem solving, critical thinking and communication skill

  d) Working experience
  • At least 2 years of working experience in related field, fresh graduate is encourage to apply

Brief Job Description:
  • Perform requirement gathering, system analysis and design development & integration
  • Perform software quality control which includes: preparing test plan, functional testing, load and performance testing, security adherence and code review
  • Carry out research on new technologies
  • Perform technical documentation
  • Involved in application implementation and support activities
  • Contribute to the improvement of application design, development and user's experience

13. Account Officers / Assistants     

Minimum Requirement:
  a) Education
  • Minimum SPM or Diploma in accounting

  b) Languages
  • Bahasa Malaysia, English, Chinese

  c) Knowledge / skill
  • Knowledge & use of ERP software & capacities

  d) Working experience
  • Minimum 1 year(s) of working experience in similar capacity, must have experience in manufacturing

Brief Job Description:
  • Perform manufacturing expenses accounts
  • Perform operating income accounts - sales analysis report
  • Perform fixed assets accounts
  • Reconcile of balance sheets figure
  • Timely reporting to Superior on monthly management reports

14. Production Control Officers     

Minimum Requirement:
  a) Education
  • Minimum SPM / Diploma / Degree in any discipline

  b) Languages
  • Bahasa Malaysia, English, Chinese

  c) Knowledge / skill
  • Skill in computer literature, manufacturing procedures and ERP system
  • Skill in production processes, material and basic mathematics

  d) Working experience
  • Minimum 1 year(s) of working experience in the related field is required for this position.Fresh graduates are encourage to apply

Brief Job Description:
  • To plan & ensure production fulfill output according to the MPS
  • To plan, control and maintain Work In Progress (WIP) and Finished Goods Inventories
  • To liaise with HUB personnel and ensure HUB is fulfilling customer requirement and follow up daily inventory report from the HUB
  • Proper planning to ensure manpower, machine and material is sufficient while generate the MPS

15. Administration Officers / Assistants     

Minimum Requirement:
  a) Education
  • Minimum SPM qualification / Diploma / Degree in any discipline

  b) Languages
  • Bahasa Malaysia, English, Chinese

  c) Knowledge / skill
  • Good interpersonal skill and able to communicate with all level of staff
  • Technically competent and knowledge of the relevant statutory requirement

  d) Working experience
  • Minimum 2 years of working experience in similar capacity

Brief Job Description:
  • To assist in departmental administration tasks i.e. purchasing, meeting minutes preparation, fixed assets maintenance, courier service and other general affairs
  • To upkeep and maintain all departmental documents completely and proper filing
  • To assist in establish in office administration procedure and monitor the effectiveness

16. Purchasing Officers     

Minimum Requirement:
  a) Education
  • Minimum SPM qualification / Diploma / Degree in any discipline

  b) Languages
  • Bahasa Malaysia, English, Chinese

  c) Knowledge / skill
  • Good interpersonal skill and able to communicate with all level of staff
  • Good negotiation skill

  d) Working experience
  • Minimum 1 year(s) of working experience in the related field is required for this position

Brief Job Description:
  • Effective procurement of raw material and components parts
  • Expedite on delivery schedule of supplier
  • Actively work with supplier on quarterly cost down plan
  • Liaise with customers, relevant department and suppliers in the defected materials
  • Perform vendor performance appraisal
  • Perform payment application to Accounts Dept